Uwell Valyrian Coils are a critical component of every e-cigarette device. Coils are what heat the e-liquid in your device and convert it to vapor. The coil is a wire wound in a spiral pattern around the wicking material in your device. It is then secured in place by an atomizer head - the coil that connects your battery's positive and negative sides.
The wick is typically saturated with e-liquid before you vape, and when you do, the battery is activated, heating the coil, which then vaporizes the e-liquid. Once the vapor has made its way up through the clearomizer, or 'engine room,' as it is often referred to, it is ready to be inhaled by the user. In most cases, stainless steel is used for the coil wire since it is very conducive and heat resistant.
Experienced vapors purchase special alloy wire and its chosen winding materials. The coil wire is then securely winded, manually fitted into its vapor set, and then pulled the wipping substance amid the wind. However, the majority of vapers will buy ready-made substitutes like the Uwell Valyrian Coils.
The appropriate moment to change the coil
Your coils will not last forever, depending on the heat intensity and the usage frequency. The PG/VG of the e-liquid, like the wattage and power you use, may burn it out more rapidly. You'll have to replace the coil more frequently if you are a highly common vaper and put your equipment through the wringer. High wattage, pleasant aromas, and a high VG e-juice will be quickly burned through spools and wicking material (typically cloud-chasing variables).
At the right moment, you feel the urgency of changing the coil.
A burned or decreased flavor in your vapor is one of the first signs. This is because the tank runs too hot for the coil to handle. Chain vapor may sometimes also damage the life of your bobbin because it can become too hot and burn the bobbin. You may notice that cotton is frequently discolored and brushed when checking your bow and wicking material closer.
Using burnt wicking material will result in less effective absorption of the e-liquid, which will negatively impact the flavor and quantity of vapor produced. E-liquid is also a contributing factor to this. Although you may not be chain vaping, high VG liquids are vicious and inherently sweet, and they tend to caramelize on the wicking material when exposed to high temperatures. You'll need to modify if this prevents them from functioning correctly.
It's also important to be aware of any leakage devices. The causes for this are many, and each one should be considered carefully. The ramp upon them will not be functioning correctly if it is the consequence of a broken coil, and you may hear a gurgling sound as you inhale if this is the case. It may also occur when the cotton no longer can absorb e-liquid effectively, causing the device to leak when it is fired or left lying about.
You may discover that your mod or kit completely stops generating vapor if you disregard the signals or do not know them. Even if you inhale, you may even have an e-liquid spit back in your mouth, which is not as pleasant as the aromatic vapor. Once the symptoms of an aged coil are noticed, inspect and replace it.
Step-by-step instructions for cleaning your coil may be found here:
- Take the wicks out of the coils.
- Dry burn the coils as gently as possible
- Remove the atomizer from your mod/device
- Run the atomizer under running water to clean it
- Repeat the procedure one more time.
- Dry burn the coil to eliminate any water droplets.
