Resistance coils are the gold mines to your vape tanks. The draw flow is directly connected with them and without them, you just cannot imagine having vapors with an awesome nicotine strength that every vaper dies for! It is these coils that heat the e-liquid and converts it into clouds. There are numerous coil options available in the vape industry but if you are vaping with the Uwell Valyrian Tank then nothing else but the Uwell Valyrian Coils are the ultimate replacement coils to set the vaping drive to unparalleled bliss! Here's all you need to keep yourself updated about the impressive performance of these coils that are known for creating uninterrupted, clean, and massive flavors.
THE UNIQUE FEATURES OF UWELL VALYRIAN COILS
Constructed from Kanthal, these are built upon the parallel coil design. Each pack contains any of the two distinct coils that are 0.15Ω dual coil that supports 95-120 W and 0.18Ω mesh coil, which supports 90 to 100 W. A pack of two coils uses organic cotton as the wicking material that absorbs the vape juice ultimately and delivers a unique vaping standard with its mind-blowing resistance that sets the rich and full-capacity air-flow system to make your cloud productions bigger, thicker, and smoother! The design is robust and won't break until its last vapor delivery hits you hard.
THE REPLACEMENT ACTION
After selecting the best suitable resistance coils for your tanks, you should be a pro at replacing them. Here's a little briefing on how to maintain your coil substitutions.
# Unhook the parts of your vape unit
This means to separate your base tank from the device. If there is any e-liquid left, empty it. Do it by wearing gloves or holding a cotton cloth. If you are doing it for the first time, just take out the user manual and do as shown in the leaflet or have a look at a youtube video.
# Taking care of the hygiene
For a perfect coil installation, run batches of water through your main vape tank base. Using warm water is even better as it will thoroughly clean the minutest corners. Using them daily makes them dirty and it is important to keep their hygiene maintained as it is going to deliver something that your inner body will consume so to avoid any kind of infections, an intense cleaning is mandatory.
# Clean your coils
Not only your vape tanks but also the new coils to be installed need to be cleaned properly. Soak them simply into the warm water for a few minutes. You can also use baking and vinegar for making the cleaning process all the more intensive.Now, let them dry. You can use a clean dry cotton cloth for drying them completely or go for a paper towel but ensure that they do not hold even a dot-sized water droplet.
# Air Dry at room temperature
Even if you are sure that the coil and tank are fully dried, leave them out for a natural drying process for another 30 minutes. Don't keep them under sunlight or use heating processes like hair dryers for making the process quicker.
#Fill in the e-juice
Now that all are set, fill in your favorite vape juice and assemble back your vape in the anti-clockwise order to how you dismantled it in the beginning. Keep the assemblings tight.
“YOU ARE READY FOR SOME PRO VAPE TIME!”
Once you have successfully installed the Uwell Valyrian Coils, you are prepared for some massively fine nicotine hits. The cloud creations by these super smooth air-flow controlling coils are ultra-grand, flavorsome and your sub-ohm vaping requirements will reach you on cloud nine!